Place of Origin: | Zhejiang, China (Mainland) |
Add to My Favorites | |
HiSupplier Escrow |
Quick Detail:
1.The machine is designed for cutting Spiral Bevel Gears, Zero Bevel and Hypoid Gears up to 400mm diameter and 10mm module with many cutting methods.
2.It is more suitable for roughing and finishing driving gears of axles in batch and mass productions, which are used in passenger cars, light trucks, medium-sized trucks and construction machinery.
Description:
1) A composite gear with external and internal teeth is equipped on the machine, so as the block indexing of work piece can be realized and it makes the cutting heat distributed over the work piece.
2) A high precision dual-lead worm gear pair is used for cradle and work spindle drive respectively, and many measures are adopted for enhancing structural rigidity and driving rigidity, which keep high accuracy of the machine and make the efficiency and the service life improved.
3) The Generating Method or the Infeed Method can be used when the machine is operating, which improves the working efficiency.
4) On the machine, the work holding equipment, sliding base moving, rapid friction clutch and reverse mechanism are driven by hydraulic pressure, and the counting device is controlled by electrical equipment.
Specifications:
1Work to be cut |
|||
Max. outer cone distance (spiral angle 30°, 12″cutter) |
mm |
260 |
|
Max. ratio |
|
10:1 |
|
Max. pitch diameter (spiral angle 30°) |
|
|
|
at ratio 10 : 1 |
mm |
500 |
|
at ratio 2 : 1 |
mm |
450 |
|
at ratio 1 : 1 |
mm |
350 |
|
Max. module |
mm |
10 |
|
Max. cutting depth |
mm |
20 |
|
Max. face width |
mm |
70 |
|
Max. radial setting |
mm |
270 |
|
Number of teeth |
|
5~100 |
|
Spiral angle |
|
0°~50° |
|
2Work Spindle |
|||
Diameter of taper hole at large end |
mm |
100 |
|
Taper |
|
1:20 |
|
Diameter of through hole |
mm |
78 |
|
Diameter of spindle flange |
mm |
China Press Brake Online Market. [China (Mainland)]
Business Type:Manufacturer |